Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tarzana, CA
Gate access control in Tarzana is commonly a retrofit conversation: most automated driveway gates in this neighborhood were installed during the 1980s and 1990s boom on hillside properties north of Ventura Blvd, and their keypads, intercoms, and card readers have since been discontinued. We replace those obsolete entry systems with current hardware that works with the existing gate operator, and we do it with a written price before any tool comes off the truck. If your Tarzana gate won’t open, won’t close, or no longer answers the keypad, call (213) 463-6296.
Why Tarzana Homes Are Different
Tarzana carries a particular combination of geography, housing stock, and weather that changes every gate job. The hillside streets above Ventura Blvd are mostly large lots developed between the 1970s and 1990s, with long driveways and automated swing or slide gates that are now pushing 30 to 50 years old. Those systems run on discontinued operators from Linear, Ramset, and early LiftMaster, which means service calls usually end in retrofitting rather than simple repairs.
Santa Ana winds pound the neighborhood from the mountain foothills each fall: we see swing gate hinges elongated by wind load, limit arms bent, and weld points cracked from repeated stress. Summer heat in the western Valley regularly tops 100°F, baking motor circuit boards and warping wooden gate panels until they bind. And on the sloped lots above Ventura, concrete pad settlement quietly shifts gate posts downhill, so a gate that dragged slightly last summer becomes a gate that won’t close at all by winter.
Our Main Tarzana Services
Most Tarzana calls start with one of three needs: a gate that won’t move, a gate that needs to be built, or an operator that gave up years ago. Here’s how each one works in this neighborhood.
Gate Repair in Tarzana
Tarzana gate repair means diagnosing an aging system on a hillside property, where years of wind and heat have done their work. The gate drags, the hinges groan, the chain sags, the weld splits. We identify the failing part, write the price down, and repair only what’s broken. Read the full breakdown at Gate Repair in Tarzana.
Gate Installation in Tarzana
New gates in Tarzana go onto sloped lots behind existing concrete pads that have often settled out of level, so installation includes evaluating the post footings and correcting them before the gate is hung. Many current Tarzana installations replace a wooden gate that has warped past repair. See Gate Installation in Tarzana for the process and scope.
Gate Motor & Opener in Tarzana
Most operators in Tarzana are the original units from the 1980s or 1990s, and when they fail, the part that’s needed is often a full control board or a complete operator replacement. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Details are on our Gate Motor & Opener in Tarzana page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Tarzana
Tarzana’s hillside estate gates north of Ventura Blvd were automated decades ago, and their entry systems are now well past end-of-life. The keypad has dead buttons, the phone entry box hasn’t worked in years, and the intercom delivers static instead of your delivery driver’s voice. Replacing those components with current Gate Access Control hardware brings a 1990s gate back into this decade without replacing the whole operator, and it’s work we document photographically on every visit.
Keypad Entry
Signs you need it
Your keypad ignores certain digits, or the code works only after three attempts.
What it costs in Tarzana
Most keypad replacements in Tarzana run $275-$500, depending on whether the controller board was replaced with it.
How we do it
We wire the new keypad to the operator’s existing input, set the code length, and photograph the finished mounting.
Video Intercom
Signs you need it
The screen flickers, the audio is one-way, or the camera is too faded to identify a face.
What it costs in Tarzana
A residential video intercom in Tarzana typically runs $600-$1,200, depending on whether we pull new cable or reuse existing low-voltage wiring.
How we do it
We mount the new camera unit, configure it to the operator, adjust the viewing angle for your driveway, and verify the two-way audio.
What Gate Access Control Costs in Tarzana
| Item | Typical range in Tarzana |
|---|---|
| Keypad replacement | $275-$500 |
| Video intercom replacement | $600-$1,200 |
| Phone entry module | $400-$800 |
Is gate access control repair faster now than in past years?
Most Tarzana jobs are completed same-day because the failure is a single failed component, not the whole system. Call (213) 463-6296 for a written price before work begins.
Can you add a keypad to an older Tarzana gate operator?
Yes, in most cases an older operator has a simple trigger input that accepts a modern keypad. We confirm compatibility on arrival and quote the retrofit before starting.
Gate Parts & Welding in Tarzana
Hillside gates in Tarzana carry more load than the same gate on flat ground: the weight shifts downhill, the wind works on the hinge side, and the hardware simply lets go. Our Gate Parts & Welding service replaces those worn mechanical pieces and welds the frames that are worth saving, and every job leaves with a photo record of what was found and what was installed.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, or the hinge pin has visible play when you lift the gate by hand.
What it costs in Tarzana
Hinge replacement in Tarzana runs $195-$450 per pair, depending on whether the hinge is bolted or welded to the post.
How we do it
We cut or unbolt the old hinge, align the new pair to the post and gate, weld if required, and photograph the finished joints.
Custom Welding
Signs you need it
A weld has cracked at the frame corner, or the gate has separated where the horizontal rail meets the upright.
What it costs in Tarzana
Custom welding repairs in Tarzana typically run $180-$450, depending on the length of the crack and whether we grind and reinforce the joint.
How we do it
We grind the crack clean, weld the joint back with matching rod, reinforce the back side, and photograph the repair.
What Gate Parts & Welding Costs in Tarzana
| Item | Typical range in Tarzana |
|---|---|
| Hinge replacement | $195-$450 per pair |
| Custom welding repair | $180-$450 |
| Gate roller replacement | $150-$350 per roller |
Can a cracked gate frame in Tarzana be welded, or does it need replacement?
Most cracked steel frames weld successfully if the metal is sound around the crack. We inspect the frame thickness before quoting, and if replacement is cheaper than repeated welding, we tell you so in writing.
Do you replace parts on gates installed in the 1980s and 1990s in Tarzana?
Yes, many of those gates were built from standard steel sections that are still manufactured today. We match the existing profile or weld in a modern equivalent when the original section is discontinued.
Brands We Service in Tarzana
We work on LiftMaster, FAAC, BFT, and Linear operators, among others, and we keep common control boards and limit switches stocked for same-day replacements throughout Tarzana. See our brands for the full list.
Pricing for Gate Repair in Tarzana, CA
| Service | Typical range in Tarzana |
|---|---|
| Keypad replacement | $275-$500 |
| Card reader replacement | $300-$600 |
| Video intercom replacement | $600-$1,200 |
| Phone entry module | $400-$800 |
| Hinge replacement | $195-$450 per pair |
| Gate roller replacement | $150-$350 per roller |
| Custom welding repair | $180-$450 |
| Post replacement | $600-$1,500 |
In Tarzana, prices push higher when the gate sits on a sloped lot: the post has settled, the gate needs extra shimming, or the weld path requires grinding out old repairs first. Every quote is written down and handed to you before any work starts, and the price we write is the price you pay.
Neighborhoods We Serve in Tarzana
We work the flat grid south of Ventura Blvd and the hillside streets above it. Response times run 45 to 90 minutes for most Tarzana addresses depending on traffic.
- Tarzana Hills
- Tarzana Square area
- Melody Acres
- Braemar Country Club area
- Corvette Corridor stretch of Ventura Blvd
Service Area - Cities Near Tarzana
Our crews also cover the surrounding western Valley cities: Encino, CA to the east, Sherman Oaks, CA further along Ventura, Van Nuys, CA to the north, and Studio City, CA over the hill. Dispatch is coordinated from our Los Angeles office, and the same written pricing applies.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
We typically arrive within 45 to 90 minutes anywhere in Tarzana. A live person answers at (213) 463-6296 day or night, and the technician’s name and photo are sent before arrival.
Most repairs and part replacements don’t require a permit or HOA approval. If your property is in a gated HOA community with its own entry gate, we coordinate with the HOA before scheduling the work.
Yes, most of those gates were built from standard steel sections still produced today. If the original profile is discontinued, we fabricate a visually matching replacement and photograph the comparison for your records.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tarzana Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.