Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tarzana
Gate installation in Tarzana runs $2,800-$9,500 for most driveway gates, depending on whether you’re replacing an operator on an existing gate or building a full slide or swing system from the footing up. We dispatch crews to Tarzana daily from our Los Angeles office, and most installations are scheduled within five to seven business days. If you’re standing in front of a gate that’s dragging, gaping, or dead, call (213) 463-6296 and we’ll walk through what you’re seeing before anyone gets in a truck.
Why Vance Gate Repair Sherman Oaks Is Tarzana’s Preferred Gate Installation Company
Tarzana homeowners call us because we write the price down before any work starts. That’s the whole arrangement. No verbal estimate that grows into a different invoice, no surprise line item at the end. The number we hand you covers the gate, the operator, the footings, the wiring, and the cleanup. If we find something unexpected mid-job, we stop and put the change in writing before touching it.
The technicians we send to Tarzana are background-checked and uniformed. You get a name and a photo before arrival. That matters when someone’s working at the edge of your property line for a day or two. You should know who’s on your driveway.
Every installation includes a documented photo record: the old footing, the new cage, the operator wiring, the safety photocell alignment, the final swing or slide test. You keep a copy. We file one. Nothing gets left to memory.
Our Gate Installation Services in Tarzana
Driveway Gate Installation
Most Tarzana driveway gates are on the long, sloped lots north of Ventura Blvd. That changes how we pour the footing. A gate post set in shifting fill on a hillside will drift downhill within a few seasons, and then the gate binds and the operator burns itself out trying to push against the misalignment. We set posts deeper than code minimums and use a wider footing cage where the grade exceeds a six percent slope. The price for a new driveway gate with automation typically lands between $5,500 and $12,000 in Tarzana, depending on gate width, panel material, and operator brand.
Swing Gate Installation
Swing gates are the standard on Tarzana’s older estate lots, and they take the worst punishment from Santa Ana winds. A wind gust against a 14-foot gate panel puts enormous load on the hinge side. We specify heavy-gauge post brackets, gusseted hinges, and operators with enough torque margin to hold the gate in wind without fighting the motor. A new single swing gate with operator and safety photocells runs $4,800-$9,000 in Tarzana. Double swing gates run higher, and so do jobs where the existing post has to come out and be re-footed.
Sliding Gate Installation
Slide gates make sense on flat pads and on driveways where a swing arc would block the approach or encroach on a neighbor’s setback. In Tarzana’s hills, the slab under the track is the weak point. Settling pulls the track out of true, and then the wheels bind and the motor strains. When we install a slide gate here, we cut and repour the track pad if there’s any sign of movement. Expect $5,200-$11,000 for a new sliding gate with a cantilever or track system and automation, depending on panel weight and whether we’re replacing the pad.
Pedestrian Gate Installation
A separate pedestrian gate next to the driveway saves the main gate from opening and closing every time someone walks to the street. We install them with matching hardware and, when they’re automated, with their own operator or a mag-lock tied to the property’s access system. Tarzana owners often add a pedestrian gate when they replace an aging driveway gate, and the combined job costs less than doing them a year apart.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Tarzana
We install and service Gate Installation equipment from BFT, Linear, Viking, and Ghost Controls, among others. We’ll work with whatever motor is already on your property if it’s sound, and if it isn’t, we’ll show you the test readings that say so. Our stock includes common boards, limit switches, and safety edges for older Tarzana installations, so we aren’t waiting on a distributor to finish your job.
Common Gate Installation Problems We See in Tarzana Homes
- Hinge post shift on hillside lots. The concrete pad under a swing gate’s hinge post settles downhill on sloped streets above Ventura Blvd. The gate starts dragging, then the limit arm snaps. The fix is a new footing, not a new arm.
- Discontinued operators from the 1980s and 1990s. Tarzana’s gate boom happened thirty-plus years ago, and many of those Ramset and early Linear boards are no longer made. A part swap isn’t possible when the part isn’t manufactured. We retrofit a modern operator and document the new wiring.
- Santa Ana wind damage to hinges and welds. Repeated gusts work against the hinge welds and limit arms. Hairline cracks turn into clean breaks. We weld reinforcement gussets and tune sag correction so the gate doesn’t whip in wind.
- Track misalignment on sliding gates. Heat expands the steel track, and settled pads pull sections apart. Gates jump the track or sit a half-inch off the wheels. In Tarzana, this usually means replacing the track section and re-bedding the pad, not nudging a bracket.
Pricing for Gate Installation in Tarzana, CA
A typical pedestrian gate installation in Tarzana runs $1,200-$3,200. A single swing driveway gate with a new operator is $4,800-$9,000. A full slide gate system with a repoured track pad starts around $5,200 and can reach $11,000 on wide, heavy estate gates. The main cost drivers are panel material, gate width, whether we’re re-footing an existing post or pad, and the operator you choose. Every quote includes the operator, safety devices, wiring, and the documented photo record. The price we put in writing is the price you pay, before we pick up a tool. Call (213) 463-6296 for a free measure and a written estimate at your Tarzana property.
We Also Serve Cities Near Tarzana
Our crews cover Tarzana and the surrounding San Fernando Valley communities. You’ll find us regularly in Encino, Sherman Oaks, Van Nuys, and Studio City. If you’re on the edge of Tarzana or just over the line, call and we’ll confirm coverage for your street.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tarzana
Because the pad under the track settles. Most of the hillside streets north of Ventura were cut and filled decades ago, and fill moves. The track shifts, the wheels bind, and the gate drags. Realigning a track on a settled pad without fixing the pad gives you a few months. We repour and re-bed. That’s the lasting fix.
They put sustained load on the hinge side and the limit arm, and they’ll find any weak weld. A properly installed Tarzana swing gate needs gusseted hinges, a post footing sized for wind load, and an operator that holds the gate rather than just pushes it. Undersized operators fail in the first good wind event. Call (213) 463-6296 and we’ll spec the gate for the wind your street actually gets.
The control board or motor is discontinued. Tarzana’s gate stock went in during the 1980s and 1990s, and many of those manufacturers ended production or changed connectors. When the board is gone, there’s no board to buy. We retrofit a modern operator onto the existing gate and posts when the structure is sound, and we document the new wiring so the next technician isn’t guessing.
A wooden gate can survive, but only if it’s built for it. Hollow panel cores move less than solid glue-laminated panels. We see wooden gates warp every summer in Tarzana when they’re painted dark and face full afternoon sun. Steel gates hold their shape better in Valley heat, but they’re heavier and need a stronger operator. If you want wood, we’ll frame it with steel and size the operator for the added weight. Call (213) 463-6296 for a written comparison.
Because the post carries the wind load and the slope settlement at the same time. The panel just hangs. The post gets torqued by every Santa Ana gust and then leaned by the shifting hillside. Once it’s out of plumb, the gate drags and the operator fights it. We set hillside posts deeper, with a wider cage and a concrete collar tied to undisturbed soil. That’s the spec that lasts on a slope.
Written by Adrian Vance, Owner at Vance Gate Repair Sherman Oaks, serving Tarzana with written-price gate installation and documented workmanship since 2014.