Gate Repair in North Hollywood - Fixed Today, No Surprise Invoice

Gate Repair in North Hollywood, CA

Gate access control in North Hollywood means something different than it does in the owner-occupied suburbs around us. Here, your problem is usually a shared security gate on a 1960s stucco apartment building off Lankershim or Vineland, cycling fifty times a day in 105-degree heat, with tenants propping it open with a brick because the keypad stopped reading their code and nobody called anyone. We fix that. Call (213) 463-6296 when the gate starts acting like it wants to quit, because it already did.

Call (213) 463-6296

Why North Hollywood Homes Are Different

North Hollywood is one of the most renter-dense corridors in the San Fernando Valley. The streets between Burbank Boulevard and Magnolia, and especially along Lankershim and Vineland, are packed with two-story stucco apartment complexes built from the 1950s through the 1970s. Those buildings almost all have sliding or swing security gates that were installed decades ago and were never spec’d for the vehicle volume they handle now. A gate on a 12-unit building can easily see 100 open-close cycles a day. The operators were built for maybe a third of that.

Then the Valley heat gets involved. North Hollywood regularly records 100-110°F summer days, easily 15 degrees hotter than the Westside. That heat bakes control boards, dries out lubricant, and makes steel gates expand against their posts and hardware. Add Santa Ana winds through the Valley corridors at 50 mph or more and a slightly misaligned gate gets ripped off its track entirely. What a tenant describes as “the gate broke last night” almost always turns out to be a gate that’s been failing for months. The brick propping it open is the giveaway.

Our Main North Hollywood Services

Two jobs dominate our North Hollywood call log: gate access control upgrades for landlords and property managers, and parts-and-welding repairs on those same aging shared gates. But homeowners and business owners across the neighborhood also call us for the three services below, each with its own dedicated North Hollywood page.

Gate Repair in North Hollywood

Most North Hollywood gate repairs come down to mechanical wear: rollers ground flat, hinges sagging, tracks full of sand and grit from the Valley wind, or a motor that overheated one too many August afternoons. We diagnose on site, show you what failed, and hand you a written price before any tool comes out of the truck. Full details are on the Gate Repair in North Hollywood page.

Gate Installation in North Hollywood

New gate installations in North Hollywood usually mean replacing a 50-year-old sliding gate on a rental property or adding a driveway gate to a single-family home in the Valley Glen or NoHo Arts District pockets. We measure, order, and schedule installation properly; this isn’t same-day work, but the price is still in writing before you commit. See the Gate Installation in North Hollywood page for scope and process.

Gate Motor & Opener in North Hollywood

The motor is usually the first thing North Hollywood heat kills. Control boards bake, capacitors swell, gear oil thins out and leaks. We service nine automation brands, so we repair the operator already on your gate rather than steering you toward a replacement every time. Swing, slide, and cantilever operators are all covered on the Gate Motor & Opener in North Hollywood page.

Before

After

Gate Access Control in North Hollywood

North Hollywood’s apartment corridors run on shared keypads, phone-entry boxes, and card readers that take a beating no single-family home system ever sees. A 20-unit building on Vineland might have sixty tenants using one keypad, and some of them are typing the code with keys, screwdrivers, or wet hands. The keypad fails. The landlord gets twenty text messages. That’s when we get the call. Our full Gate Access Control service covers keypads, remotes, phone entry, card readers, and video intercoms.

Keypad Entry

Signs you need it

The keypad works for some codes but not others, or the buttons need to be pressed three times before the number registers.

What it costs in North Hollywood

Replacing a weather-sealed keypad on a North Hollywood apartment gate typically runs $280 to $650, depending on whether we’re reusing existing wiring or pulling new conductors.

How we do it

We check the power supply at the keypad, test each button’s contact, replace the unit if the board is shot, then reprogram every tenant code from the building’s list and photograph the final configuration.

Card Reader

Signs you need it

The reader beeps but doesn’t open the gate, or it opens fine for some tenants’ cards and ignores others.

What it costs in North Hollywood

Card reader repair or replacement in North Hollywood usually falls between $350 and $900, with the spread due to whether it’s a standalone reader or one tied into a larger access-control panel.

How we do it

We test the reader’s output with a meter, check the Wiegand wiring at the panel, replace the reader if it’s gone deaf, and re-enroll the property’s active card list before we leave.

What Gate Access Control Costs in North Hollywood

Do you handle access control for apartment buildings in North Hollywood?

Yes. Apartment complexes are the bulk of our North Hollywood access-control work. We coordinate with property managers, work around tenant schedules, and leave a written record of every code, card, and programming change for the building file. Call (213) 463-6296 to schedule a walkthrough.

Can you add video so tenants can see who’s at the gate?

Yes, we install video intercom systems that let a tenant see and speak to visitors from their phone. On North Hollywood properties with multiple buildings, this usually means a small network setup in addition to the gate hardware. The price is quoted in writing before we start.

Gate Parts & Welding in North Hollywood

Most North Hollywood gates are old enough that the parts are no longer factory-fresh. Hinges sag, posts pull out of block walls, rails bow from fifty years of Valley sun, and the only real fix is cutting, welding, and rebuilding. That’s the work we do with Gate Parts & Welding: replace the failed component, weld what’s sound back into true, and document the result so the next technician knows what was done.

Hinge Replacement

Signs you need it

The gate squeals in use, leans visibly toward the free end, or the hinge pin has worn so thin the gate can lift an inch at the latch.

What it costs in North Hollywood

Hinge replacement on a North Hollywood swing gate typically runs $180 to $520, depending on whether we’re replacing one hinge or all four and whether the adjacent steel needs reinforcement.

How we do it

We unbolt or cut out the failed hinges, weld in new barrel hinges at the correct spacing, then set the gate’s swing and photograph the new hardware in place.

Gate Rollers

Signs you need it

The gate drags, hops, or grinds when it moves, and you can see flat spots on the roller wheels or steel shavings under the track.

What it costs in North Hollywood

Gate roller replacement in North Hollywood ranges from $150 to $450, depending on whether we’re swapping just the wheels or the entire roller bracket assemblies.

How we do it

We remove the gate from its track, replace the roller wheels and any seized bearings, clean and lubricate the track, and reset the gate’s travel so it closes flush.

What Gate Parts & Welding Costs in North Hollywood

Can you weld a gate that’s rusted through at the bottom?

Usually yes. We cut out the rusted section, weld in new matching steel, grind it smooth, and repaint the repair. If the rust has reached the gate’s structural corners, replacement may be the honest call, and we’ll tell you so with a written quote either way.

Do you fabricate custom parts for old North Hollywood gates?

Yes. Many 1960s and 1970s North Hollywood gates use hardware nobody stocks anymore. We fabricate replacement brackets, stops, and reinforcement plates in our welding shop, and every custom part gets photographed and documented before we leave.

Brands We Service in North Hollywood

We service, diagnose, and repair operators from LiftMaster, FAAC, BFT, and Linear, plus five more automation brands common on North Hollywood properties. We don’t steer you toward a replacement motor just because we don’t stock the part; see our brands for the full list. Most common boards, remotes, and photo-eyes are on our trucks.

Pricing for Gate Repair in North Hollywood, CA

Neighborhoods We Serve in North Hollywood

We work the whole North Hollywood area, from the NoHo Arts District up through Valley Glen and across to the Burbank line. Our crews are typically in the neighborhood within a couple of hours on emergency calls, and most repairs are done the same visit.

• NoHo Arts District
• Valley Glen
• Valley Village
• West North Hollywood
• Amelia Earhart area

Service Area - Cities Near North Hollywood

Vance Gate Repair works across the San Fernando Valley and the surrounding corridor. You’ll find us in Studio City, CA, Van Nuys, CA, Burbank, CA, and Sherman Oaks, CA. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, and our crews serve North Hollywood locally.

FAQs About Gate Repair in North Hollywood