Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Los Angeles, CA
Gate access control in Los Angeles means working with hillside properties, aging Spanish Colonial driveways, and salt air that eats electronics faster than inland installers expect. Most Los Angeles calls start with a keypad or intercom that stopped talking to the motor, a remote that worked yesterday, or a phone entry system that rings through but won’t release the gate. Call (213) 463-6296 and a live person answers, day or night.
Why Los Angeles Homes Are Different
Los Angeles has more automated driveway gates per square mile than nearly any city in the country, from Boyle Heights bungalows to Bel Air estates. But the terrain changes everything. Gates in Laurel Canyon, Hollywood Hills, Silver Lake, and Mount Washington sit on sloped driveways that demand high-torque operators and slope-compensated hardware. Flat-city parts bind and burn out here. The housing stock runs from 1920s Spanish Colonial and Craftsman homes in Los Feliz, where wrought-iron swing gates are bolted into aging concrete pillars, to 1970s ranch homes across the Valley with original aluminum sliders long past their roller life. Santa Ana winds from September through November gust 50 to 80 mph through hillside corridors and bend tracks or blow gates off hinges every season. Along the coastal corridor from Malibu through Venice, marine-layer salt air corrodes hinges, motors, and steel frames far faster than the mild climate suggests. LA County’s Very High Fire Hazard Severity Zone rules also require operable emergency-access releases on automated gates in hillside neighborhoods, which makes code compliance a recurring repair issue here.
Our Main Los Angeles Services
Two jobs dominate Los Angeles gate work: repair and installation, along with the motors and openers that run them. Each has its own detailed Los Angeles page linked below.
Gate Repair in Los Angeles
Most Los Angeles gate repair calls are misaligned swing gates on aged pillars, dead operator arms, and salt-corroded hinges. Post-earthquake settling in hillside neighborhoods shifts concrete footings and throws gates out of plumb, which binds operators and triggers error codes. We re-plumb the post, not just the operator, because that’s the fix Los Angeles gates actually need. Gate Repair in Los Angeles covers the full scope, written price included before any work starts.
Gate Installation in Los Angeles
New gates in Los Angeles must account for slope, wind load, and fire-zone access releases. A flat-driveway kit installed on a Mount Washington grade fails within a season. We measure, order, and schedule installations with a written scope and price, then photograph every step of the set. Gate Installation in Los Angeles explains what a full install includes here.
Gate Motor & Opener in Los Angeles
Los Angeles gate motors run hard against sun, salt, and Santa Ana gusts. LiftMaster and FAAC units dominate hillside installs, while Mighty Mule and Elite appear on flatter Valley properties. We service nine major automation brands and document limit-switch settings so the next technician, whether us or someone else, starts from a record instead of a guess. Gate Motor & Opener in Los Angeles has brand-specific detail and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Los Angeles
Gate access control in Los Angeles fails in predictable ways: keypads corroded by coastal salt air, phone entry systems that ring but won’t release because the relay board baked in Valley heat, and video intercoms knocked out by Santa Ana power surges. Most Los Angeles homes built before 1990 have access systems retrofitted onto gates that were never wired for them, which means the fix usually involves tracing an undocumented wiring run. That’s where our documentation habit pays off: every visit leaves a photographed record of what we found and what we set, under Haven Standard Clause 4. Gate Access Control is our most-called Los Angeles service.
Keypad Entry
Signs you need it
The keypad beeps but won’t release the gate, or some codes work while others stopped.
What it costs in Los Angeles
Replacement keypads in Los Angeles typically run $180 to $340 installed, with corrosion-resistant housings standard on coastal jobs.
How we do it
We test voltage at the keypad, replace or reprogram the unit, and photograph the new wiring and programming before we leave.
Phone Entry
Signs you need it
Callers ring through but pressing 9 won’t open the gate, or the system won’t dial at all.
What it costs in Los Angeles
Phone entry repairs run $150 to $500 depending on whether the fault is the relay board, the phone line, or the antenna.
How we do it
We test the relay, check line voltage, and replace the failed board or antenna, then photograph the settings we left behind.
What Gate Access Control Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry repair | $150-$500 |
| Video intercom repair | $225-$600 |
Can you fix a gate keypad the same day in Los Angeles?
Most keypad replacements are done same day. We carry common keypad models on the truck, so the swap, reprogram, and photo record usually happen in one visit. Call (213) 463-6296 and we’ll confirm what’s on the truck.
Does a hillside gate need different access control hardware?
Yes. Sloped driveways put extra load on the operator, and access systems wired to underpowered boards fail early. We match the access hardware to the operator’s actual output, not the flat-driveway default. Call for a written assessment.
Gate Parts & Welding in Los Angeles
Gate parts and welding in Los Angeles usually means rusted hinges on coastal properties, bent rails from Santa Ana winds, and posts that settled out of plumb in hillside soil. The 1920s and 1930s wrought-iron gates in Los Feliz and Silver Lake often outlast their mounting hardware, so we weld and replace the parts that actually failed, not the whole gate. That keeps the original look and saves thousands. Gate Parts & Welding covers what we repair in place versus what we replace.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the top hinge gap widened enough to see daylight through.
What it costs in Los Angeles
Hinge replacement in Los Angeles runs $150 to $450 per pair, with coastal stainless hinges pricing higher than standard steel.
How we do it
We cut or unbolt the old hinge, set the new one in place, and photograph the weld and the final gate swing clearance.
Post Replacement
Signs you need it
The post leans, the gate won’t latch, or the concrete base is cracked and shifting.
What it costs in Los Angeles
Post replacement in Los Angeles typically runs $600 to $1,500 per post, driven by footing depth and hillside access.
How we do it
We brace the gate, dig and pour a new footing, set the post plumb, and photograph the footing before and after the pour.
What Gate Parts & Welding Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Hinge replacement | $150-$450 per pair |
| Post replacement | $600-$1,500 per post |
| Gate roller replacement | $100-$250 per roller |
Can you weld a wrought-iron gate in place in Los Angeles?
Yes. We weld in place when the gate is solid and the damage is localized, which is common on Los Feliz and Silver Lake originals. The weld gets photographed and the final alignment is documented. Call (213) 463-6296 for a written price.
How much does gate welding cost in Los Angeles?
Custom welding and minor crack repair usually runs $150 to $500, depending on the length of the weld and the prep work. We quote it in writing before any torch is lit. Estimates are free.
Brands We Service in Los Angeles
We work on LiftMaster, FAAC, Mighty Mule, and Elite systems, among nine major automation brands, and stock common Los Angeles parts locally for faster turnaround. See our brands page for the full list.
Pricing for Gate Repair in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Keypad replacement | $180-$340 |
| Phone entry repair | $150-$500 |
| Video intercom repair | $225-$600 |
| Hinge replacement | $150-$450 per pair |
| Post replacement | $600-$1,500 per post |
| Gate roller replacement | $100-$250 per roller |
| Custom welding | $150-$500 |
Hillside access, coastal corrosion, and fire-zone hardware all push Los Angeles pricing toward the upper end. Every price is written and handed to you before any work starts, per Haven Standard Clause 1, so the invoice never surprises you.
Neighborhoods We Serve in Los Angeles
We dispatch across Los Angeles from our metro office. Typical response runs same day for most access-control and parts calls, with hillside and canyon addresses sometimes adding a day for truck routing.
- Laurel Canyon
- Hollywood Hills
- Silver Lake
- Los Feliz
- Venice
Service Area - Cities Near Los Angeles
We also serve West Hollywood, CA, Beverly Hills, CA, Venice, CA, and Santa Monica, CA. Each city page has local pricing and response detail.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Angeles
Most repairs don’t need a permit, but new installations and post replacements in fire-zone hillside areas often do. We check local requirements before quoting and include permit coordination in the written scope when it applies.
Most Los Angeles neighborhoods get same-day dispatch for access-control and parts repair. Hillside and canyon routes can add a day, but a live person answers 24/7 to confirm. Call (213) 463-6296.
Yes. Every job, including hillside installations and coastal repairs, is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right within one year, no argument and no additional fee.
Call Vance Gate Repair at (213) 463-6296 for a free estimate on any gate repair in Los Angeles. The price is in writing before the work starts, and the photo record is yours to keep.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.